Certificate in Testing and Certification

School of Science and Technology Department of Construction and Quality Management   Certificate in Testing and Certification  

Certificate in Testing and Certification

Aims

The course aims to provide students with practical skills and knowledge in testing, inspection, and certification. Students will examine and apply relevant fundamental knowledge and skills associated with physical and mechanical testing, electronic and electrical testing, chemical and biological testing, and quality assurance as a T&C practitioner.

Students passed this short course are eligible to be admitted into below degree programme

Bachelor of Applied Science with Honours in Integrated Testing, Inspection and Certification Program

More information: https://admissions.hkmu.edu.hk/ug/st/integrated-testing-inspection-and-certification/

Programme CodeCTC
Contact hours100 hours (50 hours Lecture & 50 hours Lab)
Attendance RequirementLecture 80% or above and Lab 100%
QF level3
Medium of instruction:Cantonese with English terminology

Course schedule

Date of the course:19 May - 9 June 2023 (excluding Saturday, Sunday and Public Holiday)
Time:9:30a.m – 5:00p.m
Venue:Jockey Club Campus at Hong Kong Metropolitan University

Course content

Topic 1Physical and mechanical testing
• Introduction on the Specification of Competency Standards (SCS)
• Sample handling and measurement
• Laboratory preparation work
• Concrete sampling and testing
• Data record and process in toys testing
Topic 2Electrical and Electronic Testing
• Basic concepts in sample handling and measurement
• Laboratory preparation work
• Data record and process in safety testing
Topic 3Chemical and Microbiological testing
• Basic concepts in sample handling and measurement
• Laboratory preparation work
• Organic analysis
• Data record and process in biological and microbiological testing
Topic 4Quality Assurance
• Basic concepts in quality control and quality assurance
• Sampling techniques
• Data record and process in inspection of consumer products
• Ethics consideration

Teaching and Learning

The lectures are used to present and explain the concepts and principles in testing and certification which are further strengthen in the laboratory sessions. Students are also required to complete the assignment and submit the laboratory reports. 

Assessment

To pass the course, students must pass the assessments. The assessments consist of written test (short questions and long questions) and practical assessment.

Application

The application must be completed online by the following link.

https://student.intranet.hkmu.edu.hk/ers/prod/ERS_detail.jsp?eid=006820

The deadline for submissions is May 7, 2023.  The quota is 80.  The application will be accepted on a first-come, first-served basis.

Course fee

Course fee is HK$2000.  This course fee will be refunded to the students if they successfully registered the programme in September 2023. 

Payment method

Course fees should be paid by credit card (visa/ mastercard)/ union pay/ crossed cheque. Crossed cheque made payable to “Hong Kong Metropolitan University”. Please specify the programme title(s) and applicant’s name on the back of the cheque. The postal address for the cheque is:

 

The postal address is:

A0911, 9/F, School of Science and Technology, Main Campus, Hong Kong Metropolitan University

Campus Access Control Measures

Students need to meet campus access control measures. For updates of vaccination information, please refer to the University’s website at https://www.hkmu.edu.hk/covid-19-info-hub/ . 

Contact Information

Jonathan Chiu
Marketing Director
3DP Technology Limited

Jonathan handles all external affairs include business development, patents write up and public relations. He is frequently interviewed by media and is considered a pioneer in 3D printing products.

Krutz Cheuk
Biomedical Engineer
Hong Kong Sanatorium & Hospital

After graduating from OUHK, Krutz obtained an M.Sc. in Engineering Management from CityU. He is now completing his second master degree, M.Sc. in Biomedical Engineering, at CUHK. Krutz has a wide range of working experience. He has been with Siemens, VTech, and PCCW.

Hugo Leung
Software and Hardware Engineer
Innovation Team Company Limited

Hugo Leung Wai-yin, who graduated from his four-year programme in 2015, won the Best Paper Award for his ‘intelligent pill-dispenser’ design at the Institute of Electrical and Electronics Engineering’s International Conference on Consumer Electronics – China 2015.

The pill-dispenser alerts patients via sound and LED flashes to pre-set dosage and time intervals. Unlike units currently on the market, Hugo’s design connects to any mobile phone globally. In explaining how it works, he said: ‘There are three layers in the portable pillbox. The lowest level is a controller with various devices which can be connected to mobile phones in remote locations. Patients are alerted by a sound alarm and flashes. Should they fail to follow their prescribed regime, data can be sent via SMS to relatives and friends for follow up.’ The pill-dispenser has four medicine slots, plus a back-up with a LED alert, topped by a 500ml water bottle. It took Hugo three months of research and coding to complete his design, but he feels it was worth all his time and effort.

Hugo’s public examination results were disappointing and he was at a loss about his future before enrolling at the OUHK, which he now realizes was a major turning point in his life. He is grateful for the OUHK’s learning environment, its industry links and the positive guidance and encouragement from his teachers. The University is now exploring the commercial potential of his design with a pharmaceutical company. He hopes that this will benefit the elderly and chronically ill, as well as the society at large.

Soon after completing his studies, Hugo joined an automation technology company as an assistant engineer. He is responsible for the design and development of automation devices. The target is to minimize human labor and increase the quality of products. He is developing products which are used in various sections, including healthcare, manufacturing and consumer electronics.

Course CodeTitleCredits
 COMP S321FAdvanced Database and Data Warehousing5
 COMP S333FAdvanced Programming and AI Algorithms5
 COMP S351FSoftware Project Management5
 COMP S362FConcurrent and Network Programming5
 COMP S363FDistributed Systems and Parallel Computing5
 COMP S382FData Mining and Analytics5
 COMP S390FCreative Programming for Games5
 COMP S492FMachine Learning5
 ELEC S305FComputer Networking5
 ELEC S348FIOT Security5
 ELEC S371FDigital Forensics5
 ELEC S431FBlockchain Technologies5
 ELEC S425FComputer and Network Security5
 Course CodeTitleCredits
 ELEC S201FBasic Electronics5
 IT S290FHuman Computer Interaction & User Experience Design5
 STAT S251FStatistical Data Analysis5
 Course CodeTitleCredits
 COMPS333FAdvanced Programming and AI Algorithms5
 COMPS362FConcurrent and Network Programming5
 COMPS363FDistributed Systems and Parallel Computing5
 COMPS380FWeb Applications: Design and Development5
 COMPS381FServer-side Technologies and Cloud Computing5
 COMPS382FData Mining and Analytics5
 COMPS390FCreative Programming for Games5
 COMPS413FApplication Design and Development for Mobile Devices5
 COMPS492FMachine Learning5
 ELECS305FComputer Networking5
 ELECS363FAdvanced Computer Design5
 ELECS425FComputer and Network Security5